Brighter pavers with clean, freshly sanded joints
Paver Cleaning and Joint Sand in Sawgrass, FL
Call (904) 606-1450 for a free estimate and brighter, cleaner pavers at your Sawgrass home.
- Brings out deeper paver color
- Fresh joint sand helps lock pavers in place
- Gives weeds less room to grow
- Makes the surface easier to keep clean
- Free estimate, no obligation
Request a Free Estimate
Free, no obligation.
Can I get my pavers cleaned in Sawgrass without a long wait?
You can get paver cleaning in Sawgrass, FL from a local contractor, and you will hear back within 1 business day, usually much sooner. Fresh joint sand is part of the job, and the free estimate comes with no pressure to book. To get started, call (904) 606-1450.
Cleaning lifts algae, rust and dirt off the surface so your pavers look brighter and grip better underfoot. New sand then packs the joints, which holds the pavers steady and gives weeds less space. A side walk that went green over the summer can match the rest of the yard again. Show the contractor the worst stretches of pavement when you request your free estimate.
Paver Sealing Sawgrass Is Proud to Serve Northeast Florida
What is part of a paver cleaning job?
Plan on stain treatment, a low pressure wash and fresh joint sand after the pavers dry. It is sold by itself and also serves as the opening stage of a sealing job. Shaded sides and spots near sprinkler heads usually take the most time. To line up a cleaning, call (904) 606-1450.
Stain treatment
A cleaner matched to the stain goes on first, whether algae, rust or oil.
Gentle wash
A surface cleaner at low pressure gives an even pass without emptying the joints.
Fresh joint sand
New sand goes into each joint after the pavers dry, then gets packed down.
Sealer if you want it
A protective coat can go on later, after the pavers have dried all the way through. The sealing guide covers what it adds.
What are the signs my pavers need cleaning?
Look for a green or black film on shaded edges, brown tea-colored streaks under oaks, orange marks near sprinklers, weeds in the joints and sand on the drive after rain. Algae matters most, because a slick walk or pool deck is a fall risk. To have yours looked at, call (904) 606-1450.
Is cleaning enough, or should I seal my pavers too?
A cleaning fixes how the pavers look now, and sealer helps that look last. Stopping at a cleaning costs less today, but algae, rust and fading return on their own schedule. Once a coat is down, future washes go faster, though the coat itself needs redoing every few years. Let the contractor know if you also want the coat when you request your free estimate.
How often should pavers be cleaned?
Many homes do well with a cleaning about once a year, and Family Handyman suggests spring. Shaded walks and pavers next to sprinklers around Sawgrass may need it sooner, while an open, sunny drive can wait longer. Call (904) 606-1450 to build a cleaning schedule around your property.
Does a harder blast clean pavers better?
No. Unilock warns that wrong pressure or nozzle settings can crack or erode pavers and blow sand out of the joints. It also says to rinse at a 30 degree angle or less. A rust stain does not lift with force either, a Northeast Florida washing company notes. Ask what pressure and tools the contractor uses when you request your free estimate.
How the wash is done counts for as much as the equipment used. Keeping the surface cleaner at one height gives an even wash, and a stain-specific product does the real work. Ask where the runoff goes if your yard slopes toward a pond. To ask those questions now, call (904) 606-1450.
What are the orange stains near my sprinklers?
Most often iron. A Northeast Florida washing company says iron in well water and reclaimed irrigation leaves orange marks on pavers, concrete and stucco. A rust treatment lifts it, and it has to come off before any sealer goes on. Point out the marks when you request your free estimate.
How long do pavers need to dry before sealing?
Unilock says a few hours in warm sun, or about a day in cooler shade, after cleaning. Sealer over damp pavers can turn milky, a Northeast Florida washing company warns. A rainy week can move the schedule. Ask how the contractor handles weather delays when you request your free estimate.
Why do white patches show on newer pavers?
On newer pavers, a chalky white haze is usually efflorescence, which comes from natural salts in the paver materials working up to the surface. Per Unilock, the haze often clears within two to three months, though a full year is possible, and sealer waits until it has cleared. Old sealer that has clouded can look similar. Point out the white patch to the contractor when you phone (904) 606-1450.
Which paver surfaces can be cleaned?
Washing suits any paver surface, whether it is a drive, a deck, a patio or a walk. The grime on each one differs, so the wash should fit the spot. To start with yours, request your free estimate.
Driveways
Tires, oil drips and hours of direct sun all land on the driveway first. Cleaning the driveway keeps the color even and the joints full under a parked car.
Pool decks and lanais
Pool decks get splash water, chlorine and bare feet. Cleaning a pool deck should leave it draining well and not slick.
Patios and courtyards
A shaded patio stays damp and grows algae early. Cleaning a patio focuses on lifting the green and slowing its return.
Walkways and entries
Entry walks sit next to mulch, soil and sprinkler heads, so they stain easily. Cleaning the front walk is a small job every guest notices.
What paver problems are common around Sawgrass?
Sun fading, algae, lost sand, sprinkler stains and oak stains are all common here. A wash fixes a few of these alone, while the others call for extra steps. To find out which you have, call (904) 606-1450.
1. Sun fading on open driveways
An open driveway sits in sun for most of the day, so bare pavers turn chalky there before anywhere else. A Northeast Florida washing company says full sun can push a reseal closer to every two years.
2. Algae on damp, shaded sides
That company says moisture collects on the north and east sides of a house in this humid climate. Those walks and patio corners turn green first, and a slick surface is a fall risk.
3. Sand washed out by summer storms
Afternoon storms wash sand out of the joints. Once the joints run low, pavers start to shift and weeds take root, so sand goes back in before any sealer.
4. Orange marks from sprinklers
Iron in well water or reclaimed irrigation leaves orange stains. The same company says those need a rust treatment, because more pressure does not lift them.
5. Brown tea-colored oak stains
Oak tannin leaves brown water stains on pavers. A cleaning lifts the stain, and a coat afterward helps keep the next one from setting in.
What does paver cleaning cost in Sawgrass?
A Northeast Florida washing company prices the full clean, sand and seal at $1.75 to $3.25 per square foot, and the wash is part of that. No published figure covers a wash alone for every job, so ask for it as its own line. Joint sand and stripping are often priced apart from the wash. For a price on your property, request your free estimate.
Thinking of sealing too? Ask for a single combined price. A published price guide lists the add-ons shown below. For help comparing the two, call (904) 606-1450.
Want the surface protected as well? Read about sealing your pavers, scan the areas we serve or return to paver sealing in Sawgrass.
| Paved area | New joint sand | Stripping old sealer |
|---|---|---|
| 300 sq ft | $75 to $225 | $225 to $450 |
| 600 sq ft | $150 to $450 | $450 to $900 |
| 1,000 sq ft | $250 to $750 | $750 to $1,500 |
Both columns multiply the per square foot add-on rates in a published Northeast Florida price guide: $0.25 to $0.75 for joint sand and $0.75 to $1.50 for stripping. They sit on top of the wash. The final price comes from the contractor once the surface has been seen.
Why use a local contractor for paver cleaning in Sawgrass?
A local contractor works around the same damp shade and summer storms that turn pavers green here. Check the price against published rates and take as long as you need to decide. To start, request your free estimate.
A contractor who works nearby
A local contractor who covers your part of the county knows the weather and the neighborhood rules. That makes the first visit more useful.
Free to ask, free to say no
The visit and the estimate cost nothing. If the price does not fit, you can pass and owe nothing.
Prices you can check first
Local companies publish their per square foot rates, and this site shows that range. If a quote lands well outside that range, ask the contractor why.
You choose the pace
Get the price in writing and take your time. Before signing, run through the checklist on the contractor standards page.
How do I get a free paver cleaning estimate in Sawgrass?
Send a quick request or call, and a contractor replies within 1 business day, usually much sooner.
Free, no obligation
How do pavers look after cleaning in Sawgrass?
How does the paver cleaning process work from start to finish?
Paver cleaning follows a set order of steps, starting with a look at the surface and ending with a walk-through. Without sealing, the job stops after the joints get their new sand. To get on the schedule, call (904) 606-1450.
1. Look it over
The contractor takes photos, measures the area for the cleaning quote and notes sunken spots, old sealer, stains and where water collects.
2. Protect and treat
Plants, outlets and windows get covered, and the sprinklers go off. Algae, rust and oil stains each get a cleaner matched to that stain.
3. Wash the surface
A surface cleaner washes the pavers at low pressure. Unilock, a paver maker, warns that wrong settings blow sand out of the joints.
4. Refill the joints
Once the pavers are dry, fresh sand is swept in and settled so the pavers lock together again.
5. Seal and walk it with you
When sealer is included, it goes on a dry surface by sprayer, foam roller or short pile roller. The contractor then shows you the finished area and how long to stay off it.
Frequently Asked Questions
How much does it cost to clean pavers?
No single published figure covers every job, so ask for the wash as its own line. A Northeast Florida washing company prices the full clean, sand and seal at $1.75 to $3.25 per square foot. A published price guide lists new joint sand at $0.25 to $0.75 per square foot and stripping at $0.75 to $1.50 on top.
Can I surface clean pavers?
Yes, a surface cleaner is a common tool for it. Unilock, a paver maker, says to use low pressure and to spray at no more than a 30 degree angle. Wrong settings can crack or erode pavers and blow sand out of the joints.
Can I clean, sand and seal my pavers?
You can, in that order. Wash, let them dry, refill the joints and then seal. Sealing over dirt or wet pavers is how jobs fail, a Northeast Florida washing company says, and damp sealer can turn milky.
Is it good to seal pavers in Florida?
In Florida, pavers usually fare better with a coat on them. Sun fades the color, storms wash sand from the joints and humidity feeds algae, and sealer slows all three. A cleaning alone gives no protection.
How to refurbish old pavers?
Start by looking at the surface. Faded, green or sandless pavers need a wash, new sand and a coat. A white, hazy or flaking old coat has to be stripped first, and the same price guide adds $0.75 to $1.50 per square foot for that. Sunken pavers need their base fixed.
Can I use Dawn dish soap to clean my pavers?
For light organic stains such as algae, Unilock suggests soap and water or a paver cleaner with a soft brush. For oil, soak it up with a paper towel or kitty litter first. Avoid wire brushes, which can leave metal particles that rust.
Why do pavers turn green in Sawgrass?
Moisture and shade. A Northeast Florida washing company says moisture collects on north and east sides in this humid climate, and afternoon storms feed algae. Cutting back plants near the edges and turning sprinkler heads away can help.
What are the orange marks on my pavers near the sprinklers?
Usually iron. A Northeast Florida washing company says iron in well or reclaimed irrigation water leaves orange stains that need a rust treatment, not more pressure. Aim the heads away from the surface once it is clean.
Want clean, tidy joints at your Sawgrass home?
Phone or fill in the form, and a local contractor answers within 1 business day, frequently sooner, with no charge for the visit.
Free, no obligation